How To Leave Ultra Air Tucson Without Being Noticed

works we could easily just connect this to the low pressure end and begin normally when you're going to add refrigerant and there's no leak you want to pull a vacuum on the system so that there's no moisture but since we know there's a leak we're going to just use one of these cans not pull a vacuum and charge it up and then since.

This has the UV dye in it we'll go look for the dye with our pen after the system is all charged up and been running for a little bit okay so now we'll need to find our low pressure valve that we're going to connect to all you have to do is follow your AC system hoses and find the Schrader valve sometimes the Schrader valve.

caps are labeled L for low and H for high in this case you can see this valve is labeled H for high but our low pressure line isn't labeled L for low but you could also tell the low pressure line from the high pressure line because the low pressure line is thicker than the high pressure line also you can't really mess things up because the connector from the kit only fits on the low pressure line the high pressure line and low pressure line both have different sized Schrader.

valves now let's go start the engine Ultra Air Tucson and connect our bottle to the low pressure line so now we're going to start the car make sure the AC is on now we'll go to the engine apartment and I'll show you what we need to do so we're going to leave the fan running and you can see the temperature before now let's go add the refrigerant and you'll see how the temperature will drop so let's start the process of actually charging up the air conditioning system the engines running the AC is on.

Leave a Reply

Your email address will not be published. Required fields are marked *